top of page
Search

Keeping the Wedding Glass: A Kaleidoscope Made From the Glass Broken at the Ceremony

Oct 27
6 min read

A wedding glass keepsake can be built as a kaleidoscope: the shards of the glass broken at the ceremony are cleaned, sorted and sealed in the instrument's object cell, where the mirrors repeat them into a symmetrical image each time the cell is turned. This article describes the custom briefly, compares the keepsake options that already exist with this one, explains how the studio builds it and what the image looks like, and covers shipping the shards, the anniversary angle, and the practical questions about shard size, quantity and coloured glass.

By Rocco (Roi) Ramon - architect and kaleidoscope maker, Studio Yabaye

The custom, briefly

At the close of a Jewish wedding ceremony a glass is broken, usually by the groom stepping on it, and usually wrapped in cloth or a bag so the pieces are contained. The act has several traditional interpretations; this article does not take a position on them. The practical result is a cloth or bag holding a quantity of glass fragments, and the question of what to do with them.

Most couples keep the pieces. Some keep them in the bag they were broken in. Others look for a way to make the fragments into an object that is handled rather than stored.

Existing keepsake options

The established options for the shards:

  • A mezuzah case. The shards are set in resin or behind glass inside the case, which is then fixed to a doorpost. The glass is seen in passing.

  • A framed or boxed arrangement. The shards are laid out and sealed behind glass in a frame, a shadow box or a paperweight. The glass is seen as a static arrangement from one viewpoint.

  • Jewellery. A single fragment set in a pendant or ring. One piece is used; the rest are stored.

Each of these shows the glass as it is: fragments, fixed, seen once in one configuration.

The kaleidoscope option: the shards seen through the mirrors

A kaleidoscope changes the relationship. The shards are placed in the object cell at the far end of the instrument, in front of the mirrors. When the cell is turned, the fragments move across the mirror entrance and the mirrors repeat them: a three-mirror system tiles the field with six-fold copies, a two-mirror system makes a rosette. The fragments are not arranged into a picture; they are the raw material for a pattern that is different at every position of the cell.

What this does mechanically:

  1. The clear glass has edges, and edges refract and reflect daylight. Against a bright window each fragment reads as a bright outline with a darker interior.

  2. The mirrors multiply every edge by six (in a three-mirror system). A handful of fragments becomes a continuous lattice of bright lines.

  3. Turning the cell changes which fragments overlap, so the lattice rearranges. It stops when the hand stops.

The post on what you see inside a handmade brass kaleidoscope describes the general case; here the contents are the couple's own glass.

How the studio builds it

The studio has built this piece as a bespoke commission and the procedure is as follows. It is made to order, and the sequence does not vary.

  1. The client sends the shards. Everything from the bag, or a selection; the studio sorts them.

  2. The shards are cleaned and sorted. Dust and cloth fibres are removed. Fragments are sorted by size so that the cell receives a usable range: a few larger pieces for structure, smaller ones to fill.

  3. The shards are placed in a sealed object cell. The cell is a dry cell - no liquid - so the fragments keep their sharp refractive edges and the cell needs no care beyond dusting. The cell is sealed; nothing moves in or out after closure. Why a dry cell rather than an oil cell for this content is explained in oil-filled vs dry cell.

  4. Optional additional elements. Clear glass alone gives a pattern of bright edges and little colour. On request the studio adds a small number of coloured elements - glass stones, beads, a brass ring - to the cell with the shards, so the pattern has colour as well as line. The studio's rule, following Brewster, is that the cell is left partly empty so the contents can move; the reasoning is in object cell rules.

  5. Engraving. The barrel takes up to 8 words (30 characters): two names and a date is the usual choice. A logo or monogram is possible. No mock-up is produced for a single piece.

  6. Finish, stand, box. Brass finish matte, dark or glossy; stand in brass, wood or 3D-printed at no extra charge; a gift box as an option, otherwise a plain white box with the logo.

  7. Lead time. The piece is made to order. Dispatch time depends on the current queue and is confirmed when the commission is accepted.

The piece is signed and shipped with a certificate of authenticity with hologram. The general route for a bespoke piece is in custom brass kaleidoscope commission and the step-by-step is in the custom order process.

What the image looks like

Clear glass in a dry cell, seen against a window with open sky:

  • A field of bright, irregular polygon outlines - the fragment edges - repeated in six-fold symmetry, with the interiors of the fragments a slightly dimmer grey-white than the background.

  • Where two fragments overlap, a brighter line where the edges cross.

  • With added coloured elements: the same lattice of bright edges, with coloured areas distributed through it that move independently of the glass as the cell turns.

The image needs direct light. A window with open sky or a desk lamp aimed at the cell gives the fragment edges enough contrast; under weak room light the clear glass has little to reflect. Never aim the instrument at the sun.

Shipping the shards safely

The shards arrive by post. Packing instructions the studio gives clients:

  1. Leave the fragments in the cloth or bag they were broken in if that is how they are stored; the cloth cushions them.

  2. Place the cloth or bag in a small rigid container - a tin, a hard plastic box - so nothing can be crushed.

  3. Pad the container inside a box or a padded envelope.

  4. Label the outer packing as containing glass fragments.

  5. Send with tracking. Ask the studio for the current shipping address through the contact page before posting.

Fragments that break further in transit are still usable; smaller pieces are placed as fill.

The anniversary angle

The piece is often ordered not at the wedding but years later, as an anniversary gift between the couple or from family. A kaleidoscope with the wedding glass in the cell and the wedding date on the barrel fits several of the traditional metal anniversaries directly - brass is the seventh-year material in most lists - and the metal anniversary gifts by year post sets out which years apply. The wider set of occasions, and how the engraving wording changes with them, is covered in kaleidoscope gifts by occasion and what to write on an engraved kaleidoscope.

Options at a glance

Option

What is placed in the cell

Engraving

Finish and stand

Shards only

The couple's glass, cleaned and sorted, dry sealed cell

Names and date, up to 8 words

Matte, dark or glossy; brass, wood or 3D-printed stand

Shards with colour

The couple's glass plus a few coloured elements

Names and date, up to 8 words

As above

Shards with logo or monogram

Either of the above

Monogram or logo

As above

Gift box

Any of the above

Any

Gift box in place of the plain white box

FAQ

How large do the wedding glass shards need to be?

Any size from a few millimetres up to roughly the width of the object cell is usable. The studio sorts what arrives: larger fragments give the pattern structure, smaller ones fill between them. Fragments that break further in shipping are still used as fill.

How many shards are needed?

A small handful is enough. The object cell is left partly empty so the contents can move when the cell is turned, so the studio selects from what is sent rather than using everything. Surplus fragments are returned with the instrument if the client asks.

Does coloured wedding glass work?

Yes. Coloured glass gives colour in the image directly, where clear glass gives bright edges only. For a clear glass the studio can add a few coloured elements - glass stones, beads or a brass ring - to the cell on request, so the pattern has colour as well as line.

Is the cell filled with liquid?

No. The shards are placed in a dry, sealed object cell. A dry cell keeps the sharp refractive edges of the glass, which are what the mirrors repeat into the pattern, and needs no care beyond dusting the instrument with a soft cloth.

Can names and the wedding date be engraved?

Yes. The brass barrel is laser-engraved in the studio with up to 8 words (30 characters) - typically two names and the date. A monogram or logo is also possible. No mock-up is produced for a single piece; the engraving is set from the submitted text.

How long does a wedding glass kaleidoscope take?

It is made to order. The lead time depends on the studio's queue at the time and is confirmed when the commission is accepted, before the shards are sent. The finished piece is signed, supplied with a certificate of authenticity with hologram, and shipped worldwide by FedEx.

Commission a kaleidoscope from your wedding glass

Every piece is built by hand in our studio in Israel, signed, and shipped worldwide by FedEx. Describe the glass you have, the names and date for the barrel, and whether you want coloured elements added, through the contact page; the studio will confirm lead time and the shipping address for the shards.

 
 
 

Recent Posts

See All

Comments


bottom of page